The OptimAir 6A powered air-purifying respirator (PAPR) provides respiratory protection by filtering contaminants from ambient air and providing air flow to either a facepiece or hood (with HEPA filters only) at a rate equal to or exceeding National Institute for Occupational Safety and Health (NIOSH) standards.

The OptimAir 6A powered air-purifying respirator (PAPR) with Ultravue, Comfo, Comfo Elite, or Comfo Welder's facepieces or Tyvek hood has approvals from the National Institute for Occupational Safety and Health (NIOSH) and the Mine Safety and Health Administration (MSHA). Filters and cartridges are covered by separate approval.  Cartridges must be replaced whenever air flow drops below four cubic feet per minute (115 lpm) with tight-fitting facepieces, six cubic feet per minute (170 lpm) with the Tyvek hood or when the user smells or tastes the contaminant.

Asbestos Abatement
Chemical
Electric Utility
Hazardous Materials
Nuclear
Oil and Gas
Paper & Pulp
Sanding & Grinding

Particulate and Dust
Toxic Atmosphere Non-IDLH

Product Information

The OptimAir 6A powered air-purifying respirator (PAPR) can be used with an entire family of filters, chemical cartridges and combination cartridges for protection against particulates, toxic gases and vapors or a combination of these hazards. Requiring two filters, the unit is available with full- or half-mask facepiece, or hood. The belt-mounted motor/blower assembly includes an efficient 4.6 volt motor which has a long service life. The motor/blower assembly features threaded connectors for quick and easy attachment of OptiFilter cartridges.

Additional Product Information

Technical Information

How to Order From MSA: